Name:  UltraMon3 HSPI Not Linux Compatible
Type: Plug-In
Provider: Ultrajones
Cost: $39.95 $29.95 upgrade from HS2
Support Information: HomeSeer Message Board

Response time to a support request should be 96 hours or less excluding weekends and holidays.

Product Overview

Description

UltraMon3 is a HomeSeer HS3 plug-in that allows you to monitor the status of devices connected to your home network. You can use UltraMon3 to generate alerts when critical network attached devices are no longer reachable on your home network. You can also trigger HomeSeer events whenever a non-monitored device is detected on your home network.

UltraMon3 also supports the ability to send a Wake on LAN (WOL) packet to turn on PC's that support WOL and to shutdown a networked PC using PsShutdown or the UltraMon3 Shudown Service installed on a Windows PC.

How It Works

Main Features

Example Usage

Downloads

Screen Shots

Status

Status

Displays the plug-in status and monitored device statistics.

Options

Options

Displays and allows you to change the options associated with the plug-in.

Device Types

Device Types

Allows you to create custom UltraMon3 device types.

Devices

Devices

Displays an at-a-glance status of all UltraMon3 devices created from the IP Subnets web page.

IP Subnets

IP Subnets

Displays all discovered devices on your network. The monitored subnets are created the first time you start the plug-in and can be changed or disabled from the Options web page. A change to the list of subnets requires a restart of the plug-in.

HomeSeer Events

HomeSeer Events

You can use the HomeSeer to trigger events whenever a monitored device is no longer reachable or whenever a non-monitored device is detected on the network.

HomeSeer Devices

HomeSeer Devices

You can easily add a new monitored device from the UltraMon3 – IP Subnet web page.

More Information

Requirements